mac

VLAN Configuration
180
Chapter 15 VLAN Configuration
15.1 Commands for VLAN Configuration
15.1.1 debug gvrp event
Command: debug gvrp event interface (ethernet | port-channel |) IFNAME
no debug gvrp event interface (ethernet | port-channel |) IFNAME
Function: Enable/disable GVRP event debugging including the transfer of state
machine and the expiration of timer.
Parameters: ethernet, physical port
port-channel, aggregate port
IFNAME, port name
Command Mode: Admin mode
Default: GVRP event debugging is disabled.
Usage Guide: Use this command to enable GVRP event debugging.
Example: Show GVRP event debugging.
Switch(config)#debug gvrp event interface ethernet 1/1
%Jan 16 02:25:14 2006 GVRP EVENT: LO -> VO ，interface ethernet 1/1, vlan 100
%Jan 16 02:35:15 2006 GVRP EVENT: join timer expire，interface ethernet 1/1
15.1.2 debug gvrp packet
Command: debug gvrp packet (receive | send) interface (ethernet | port-channel |)
IFNAME
no debug gvrp packet (receive | send) interface (ethernet |
port-channel |) IFNAME
Function: Enable/disable GVRP packet debugging.
Parameters: receive, enabling the debugging of receiving GVRP packet
send, enabling the debugging of sending GVRP packet
ethernet, physical port
port-channel, aggregate port
IFNAME, port name
Command Mode: Admin mode
Default: GVRP packet debugging is disabled.