mac

VLAN Configuration
187
Default: 200|600|10000 milliseconds for join | leave | leaveAll timer respectively.
Usage Guide: Show the corresponding value of the timer specified in the command.
Example: Show the value of all garp timers currently.
Switch#show garp timer join
Garp join timer’s value is 200(ms)
15.1.19 show gvrp fsm information
Command: show gvrp fsm information interface (ethernet | port-channel) IFNAME
Function: Show the current state of all registered machines and request state machines
on specified or all ports.
Parameters: ethernet, physical port
port-channel, aggregate port
IFNAME, port name
Command Mode: Admin mode
Default: MT for registered machine and VO for request state machine.
Usage Guide: Show the corresponding state of all registered machines and request
state machines.
Example: Show the state of all state machines.
Switch#show gvrp fsm information interface ethernet 1/1
VA：Very anxious Active member，AA：Anxious Active member，QA：Quiet Active member
VP：Very anxious Passive member，AP：Anxious Passive member，QP：Quiet Passive
member
VO：Very anxious Observer，AO：Anxious Observer，QO：Quiet Observer
LA：Leaving Acitve member，LO：leaving Observer
Interface ethernet 1/1 gvrp fsm information:
Index VLANID Applicant Registrar
---- ------------ ---------- ---------
1 100 VO LV
2 300 VP IN
15.1.20 show gvrp leaveAll fsm information
Command: show gvrp leaveall fsm information interface (ethernet | port-channel)
IFNAME
Function: Show the state of leaveAll state machine on specified or all ports.
Parameters: ethernet, physical port