mac

VLAN Configuration
188
port-channel, aggregate port
IFNAME, port name
Command Mode: Admin mode
Default: Passive.
Usage Guide: Check the state of leaveAll state machine.
Example: Show the state of leaveAll state machine on port.
Switch#show gvrp leaveall fsm information interface ethernet 1/1
Interface leaveAll fsm
---------- ------------
Ethernet1/1 passive
15.1.21 show gvrp leavetimer running information
Command: show gvrp leavetimer running information (vlan <1-4094> |) interface
(Ethernet | port-channel |) IFNAME
Function: Show running of all leavetimer on current port.
Parameters: <1-4094>, VLAN tag
Ethernet, physical port
port-channel, aggregate port
IFNAME, port name
Command Mode: Admin mode
Default: leavetimer is disabled.
Usage Guide: Show running state and expiration time of each leave timer.
Example: Show running state and expiration time of each leave timer on current port.
Switch#show gvrp leavetimer running information interface ethernet 1/1
VLANID running state expired time
------------ ---------- ---------
100 UP 0.2 s
300 DOWN non
15.1.22 show gvrp port-member
Command: show gvrp (active|) port-member
Function: Shows all ports with GVRP enabled. “active” means the port is in active state
with GVRP enabled.
Parameters: active means the port is in active state
Command Mode: Admin mode