mac

VLAN Configuration
189
Default: GVRP is disabled on port.
Usage Guide: Show all ports (enable GVRP) saved in GVRP.
Example: Show all ports with GVRP enabled.
Switch#show gvrp port member
Ports which were enabled gvrp included：
Ethernet1/3（T） Ethernet1/4（T）
Ethernet1/5（T） Ethernet1/6（T）
Ethernet1/7（T） Ethernet1/8（T）
Ethernet1/9（T） Ethernet1/10（T）
15.1.23 show gvrp port registerd vlan
Commmand: show gvrp port (dynamic | static |) registerd vlan interface (Ethernet |
port-channel |) IFNAME
Function: Show the dynamic or static registration VLANs on current port.
Parameters: dynamic, dynamic registration
static, static registration
Ethernet, physical port
port-channel, aggregate port
IFNAME, port name
Command Mode: Admin mode
Default: No dynamic or static registration VLANs on port.
Usage Guide: Show the corresponding VLANs of the registered machines by dynamic
or static registration.
Example: Show all dynamic or static registration VLANs on current port.
Switch#show gvrp port registerd vlan interface ethernet 1/1
Current port dynamic registerd vlan included：
Vlan10 vlan20
Vlan40 vlan60
Current port static registerd vlan included：
Vlan10 vlan30
Vlan40 vlan200
15.1.24 show gvrp timer running information
Command: show gvrp timer (join | leaveall) running information interface (ethernet
| port-channel |) IFNAME
Function: Show running of all join|leaveAll timer on current port.