mac

VLAN Configuration
204
Parameter: None.
Command Mode: Admin Mode and other configuration Mode.
Usage Guide: Display the ports of enabling MAC-based VLAN, the character in the
bracket indicate the ports mode, A means Access port, T means Trunk port, H means
Hybrid port.
Example: Display the ports of enabling MAC-based VLAN currently.
Switch#show mac-vlan interface
Ethernet1/1(A) Ethernet1/2(A)
Ethernet1/3(A) Ethernet1/4(A)
Ethernet1/5(H) Ethernet1/6(T)
15.3.9 show protocol-vlan
Command: show portocol-vlan
Function: Display the configuration of Protocol-based VLAN on the switch.
Parameter: None.
Command Mode: Admin Mode and Configuration Mode
Usage Guide: Display the configuration of Protocol-based VLAN on the switch.
Example: Display the configuration of the current Protocol-based VLAN.
Switch#show protocol-vlan
Protocol_Type VLAN_ID Priority
------------------- ------------- ---------
etype 0x800 200 4
etype 0x860 200 4
etype 0xabc 100 5
15.3.10 show subnet-vlan
This command is not supported by this switch.
15.3.11 show subnet-vlan interface
This command is not supported by this switch.
15.3.12 subnet-vlan
This command is not supported by this switch.
15.3.13 switchport mac-vlan enable