mac

Commands for MAC Address Table Configuration
206
Chapter 16 Commands for MAC
Address Table Configuration
16.1 Commands for MAC Address Table Configuration
16.1.1 mac-address-table avoid-collision
Command：mac-address-table avoid-collision
no mac-address-table avoid-collision
Function：Enable the function of the hash collision mac table that issued ffp, the no
command recover to disable the function.
Parameter：None.
Command mode：Global Mode
Default：Do not issue the hash collision mac table.
Usage Guide：it takes effect when using MAC learning. Enable/ Disable the function will
empty the hash collision mac table.
Example： Enable the function of the hash collision mac table that issued ffp.
Switch(Config)#mac-address-table avoid-collision
16.1.2 clearCollisionMacTable
Command：clearCollisionMacTable
Function：Clear the hash collision mac table.
Parameter：None.
Command mode：Admin Mode.
Usage Guide：If enable the function of the hash collision mac table that issued ffp
(mac-address-table avoid-collision), the mac cannot be cleared.
Example：Clear the hash collision mac table.
Switch#clearCollisionMacTable
16.1.3 clear mac-address-table dynamic
Command: clear mac-address-table dynamic [address <mac-addr>] [vlan
<vlan-id>] [interface [ethernet | portchannel] <interface-name>]
Function: Clear the dynamic address table.
Parameter: <mac-addr>: MAC address will be deleted; <interface-name> the port