mac

Commands for MAC Address Table Configuration
218
Switch(Config)#mac-address-table notification
16.3.3 mac-address-table notification history-size
Command: mac-address-table notification history-size <0-500>
no mac-address-table notification history-size
Function: Configure the maximum history-size for storing MAC changing message, the
no command restores the default value.
Parameter: history-size: data length of sending the notification, its range from 1 to 500.
Default: 10.
Command Mode: Global mode
Usage Guide: After the global switch is disabled, this command is also able to be
configured sequentially.
Example: Change the maximum history-size to be 256.
Switch(Config)#mac-address-table notification history-size 256
16.3.4 mac-address-table notification interval
Command: mac-address-table notification interval <0-86400>
no mac-address-table notification interval
Function: Configure the interval for sending the MAC address notification, the no
command restores the default interval.
Parameter: interval: interval for sending the notification, unit is second, its range from 0
to 86400.
Default: 30s.
Command Mode: Global mode
Usage Guide: After the global switch is disabled, this command is also able to be
configured sequentially.
Example: Configure the interval as 30s for sending the MAC address notification.
Switch(Config)#mac-address-table notification interval 30
16.3.5 mac-notification
Command: mac-notification {added | both | removed}
no mac-notification
Function: Configure the MAC address notification for the specified port, the no
command cancels the function.
Parameter: added: the added MAC address
removed: the removed MAC address