mac

Commands for MAC Address Table Configuration
219
both: the added and the removed MAC addresses
Default: No MAC address notification.
Command Mode: Port mode
Usage Guide: After the global switch is disabled, this command is also able to be
configured sequentially.
Example: Send the trap notification after the MAC address is added to Ethernet 1/5.
Switch(Config)#in ethernet 1/5
Switch(Config-if-ethernet 1/5)#mac-notification added
16.3.6 show mac-notification summary
Command: show mac-notification summary
Function: Show the configuration of MAC notification and the data of the notification
packet.
Parameter: None.
Default: Do not show the summary.
Command Mode: Admin mode
Usage Guide: With this command, check the configuration of MAC address and the
sending status of MAC notification trap.
Example:
Switch#show mac-notification summary
MAC address notification:enabled
MAC address snmp traps:enabled
MAC address notification interval = 10
MAC address notification history log size = 120
MAC address added = 0
MAC address removed = 0
MAC address snmp traps generated = 0
16.3.7 snmp-server enable traps mac-notification
Command: snmp-server enable traps mac-notification
no snmp-server enable traps mac-notification
Function: Enable the trap notification of MAC address globally, the no command
disables the trap notification.
Parameter: None.