mac

Commands for QoS
254
used by 1 times
Used times
match acl name:1
Classifying rule for the class map.
18.27 show policy-map
Command: show policy-map [<policy-map-name>]
Function: Displays policy map of QoS.
Parameters: <policy-map-name> is the policy map name.
Default: N/A.
Command mode: Admin Mode.
Usage Guide: Displays all configured policy-map or specified policy-map information.
Example:
Switch#show policy -map
Policy Map p1, used by 0 port
Class Map name: c1
policy 20000 2000
Displayed information
Explanation
Policy Map p1
Name of policy map
Class map name:c1
Name of the class map referred to
policy 20000 2000
Policy implemented
used by 0 port
Number of port that use the policy
18.28 show mls qos interface
Command: show mls qos {interface [<interface-id>] [policy | queuing] | vlan
<vlan-id>} | [begin | include | exclude <regular-expression>]
Function: Displays QoS configuration information on a port.
Parameters: <interface-id> is the port ID; <vlan-id>: VLAN ID; policy is the policy
setting on the port; queuing is the queue setting for the port.
Default: N/A.
Command mode: Admin Mode.
Usage Guide: There is only red or green when packets passing police. In the print
information, in-profile means green and out-profile means red. Only when configuring
ingress policies, there is statistic information.
Example: