mac

Commands for QoS
257
classified
Total data packets match this ClassMap.
in-profile
Total in-profile data packets match this ClassMap.
out-profile
Total out-profile data packets match this ClassMap.
Switch #show mls qos vlan 100
Vlan 100:
Attached Policy Map for Ingress: p1
Classmap classified in-profile out-profile (in packets)
c1 20 10 10
c2 NA NA NA
18.29 show mls qos interface wred
This command is not supported by switch.
18.30 show mls qos maps
Command: show mls qos maps [cos-intp | dscp-intp] | [begin | include | exclude
<regular-expression>]
Function: Display the configuration of QoS mapping.
Parameters: cos-intp: The mapping from ingress L2 CoS to internal priority
dscp-intp: The mapping from ingress DSCP to internal priority
Default: None.
Command mode: Admin and Configuration Mode.
Usage Guide: Display the map configuration information of QoS.
Example: Display configuration information of the mapping table.
Switch#show mls qos maps
Ingress COS-TO-Internal-Priority map:
COS: 0 1 2 3 4 5 6 7
-----------------------------------------
INTP: 0 1 2 3 3 2 1 0
Ingress DSCP-TO-Internal-Priority map:
d1 : d2 0 1 2 3 4 5 6 7 8 9
0: 0 0 0 0 0 0 0 0 0 0
1: 0 0 0 0 0 0 1 1 1 1
2: 1 1 1 1 1 1 1 1 1 1
3: 1 1 2 2 2 2 2 2 2 2