mac

Commands for Flexible QinQ

262

Chapter 20 Commands for Flexible

QinQ

20.1 add

This command is not supported by switch.

20.2 delete

This command is not supported by switch.

20.3 match

Command: match {access-group <acl-index-or-name> | ip dscp <dscp-list>| ip

precedence <ip-precedence-list>| ipv6 access-group <acl-index-or-name>| ipv6

dscp <dscp-list> | ipv6 flowlabel <flowlabel-list> | vlan <vlan-list> | cos <cos-list> |

c-vlan <vlan-list> | c-cos <cos-list>

no match {access-group | ip dscp | ip precedence | ipv6 access-group

Function: Configure the match standard of the class map; the no command deletes the

specified match standard.

Parameter: access-group <acl-index-or-name> match the specified IP ACL or MAC

ACL, the parameters are the number or name of ACL

ip dscp <dscp-list> and ipv6 dscp <dscp-list> match the specified DSCP

value, the parameter is a list of DSCP consisting of maximum 8 DSCP values, the range

is 0 to 63

ip precedence <ip-precedence-list> match the specified IP Precedence,

the parameter is a IP Precedence list consisting of maximum 8 IP Precedence values

with a valid range of 0 to 7

ipv6 access-group <acl-index-or-name> match the specified IPv6 ACL,

the parameter is the number or name of IPv6 ACL

ipv6 flowlabel <flowlabel-list> match the specified IPv6 flow label, the

parameter is IPv6 flow label value, the range is 0 to 1048575

vlan <vlan-list> match the specified VLAN ID of the external VLAN Tag, the

parameter is a VLAN ID list consisting of maximum 8 VLAN IDs, the range is 1 to 4094