mac

Commands for Layer 3 Management
267
Nexthop
Next-hop IP address
Interface
Next-hop pass-by layer 3 swtich interfaces
Preference
Route priority. If other types of route to the
target network exists, the kernel route will
only shows those with high priority.
21.2 Commands for IPv4/v6 configuration
21.2.1 clear ip traffic
Command: clear ip traffic
Function: Clear the statistic information of IP protocol.
Parameter: None.
Command mode: Admin Mode.
Default: None.
Usage guide: Clear the statistic information of receiving and sending packets for IP
kernel protocol, including the statistic of receiving packets, sending packets and
dropping packets and the error information of receiving and sending packets for IP
protocol, ICMP protocol, TCP protocol and UDP protocol.
Example: Clear statistic information of IP protocol.
Switch#clear ip traffic
21.2.2 clear ipv6 neighbor
Command: clear ipv6 neighbors
Function: Clear the neighbor cache of IPv6.
Parameter: None
Command Mode: Admin Mode
Default: None
Usage Guide: This command can not clear static neighbor.
Example: Clear neighbor list.
Switch#clear ipv6 neighbors