mac

Commands for Layer 3 Management
277
Rcvd： 0 total 0 errors 0 time exceeded
0 redirects, 0 unreachable, 0 echo, 0
echo replies
0 mask requests, 0 mask replies, 0
quench
0 parameter, 0 timestamp, 0 timestamp
replies
Statistics of total ICMP packets
received and classified information
Sent： 0 total 0 errors 0 time exceeded
0 redirects, 0 unreachable, 0 echo, 0
echo replies
0 mask requests, 0 mask replies, 0
quench
0 parameter, 0 timestamp, 0 timestamp
replies
Statistics of total ICMP packets sent
and classified information
TCP statistics:
TCP packet statistics.
UDP statistics:
UDP packet statistics.
21.2.27 show ipv6 interface
Command: show ipv6 interface {brief|<interface-name>}
Function: Show interface IPv6 parameters.
Parameter: Parameter brief is the brief summarization of IPv6 status and configuration,
and parameter interface-name is Layer 3 interface name.
Default: None
Command Mode: Admin and Configuration Mode
Usage Guide: If only brief is specified, then information of all L3 is displayed, and you
can also specify a specific Layer 3 interface.
Example:
Switch#show ipv6 interface Vlan1
Vlan1 is up, line protocol is up, dev index is 2004
Device flag 0x1203(UP BROADCAST ALLMULTI MULTICAST)
IPv6 is enabled
Link-local address(es):
fe80::203:fff:fe00:10 PERMANENT
Global unicast address(es):
3001::1 subnet is 3001::1/64 PERMANENT
Joined group address(es):