mac

Commands for DHCPv6
329
Lease expires at %Jan 31 01:34:44 1970 (2592000 seconds left)
The number of DHCPv6 bindings is 1
27.26 show ipv6 dhcp conflict
Command: show ipv6 dhcp conflict
Function: Show the log for the address that have a conflict record.
Command mode: Admin and Configuration Mode.
Example:
Switch# show ipv6 dhcp conflict
27.27 show ipv6 dhcp interface
Command: show ipv6 dhcp interface [<interface-name>]
Function: To show the information for DHCPv6 interface.
Parameter: <interface-name> is the name and number of interface, if
the<interface-name> parameter is not provided, then all the DHCPv6 interface
information will be shown.
Command Mode: Admin and Configuration Mode.
Usage Guide: To show the information for DHCPv6 interface, include Port Mode
(Prefix delegation client、DHCPv6 server、DHCPv6 relay) , and the relative conformation
information under all kinds of mode.
Example:
Switch#show ipv6 dhcp interface vlan10
Vlan10 is in server mode
Using pool: poolv6
Preference value: 20
Rapid-Commit is disabled
27.28 show ipv6 dhcp pool
Command: show ipv6 dhcp pool [<poolname>]
Function: To show the DHCPv6 address pool information.
Parameter: <poolname> is the DHCPv6 address pool name which configured already,
and the length less than 32 characters. If the <poolname> parameter is not provided,
then all the DHCPv6 address pool information will be shown.