mac

Commands for DHCPv6 option37, 38
356
%Jan 05 00:26:40 2006 DHCP6SNP PACKET: to vlan 24 except port Ethernet1/23
(designPort flag 0)
%Jan 05 00:26:40 2006 DHCP6SNP PACKET: and return packet to network stack
switch#
30.2.4 show ipv6 dhcp relay option
Command: show ipv6 dhcp relay option
Function: Display the configuration of system relay agent, including the enable switch
for option 37 and option 38.
Parameters: None.
Command Mode: Admin mode
Usage Guide: Use this command to check relay agents’ configuration status for option
37 and option 38.
Example:
Switch#show ipv6 dhcp relay option
remote-id option enable
subscriber-id option enable
Interface Vlan 1: remote-id option configure “abc”
30.2.5 show ipv6 dhcp snooping option
Command: show ipv6 dhcp snooping option
Function: Display the configuration information of system snooping, including the
enable switch for option 37 and option 38.
Parameters: None.
Command Mode: Admin mode
Usage Guide: Use this command to check snooping configuration status for option 37
and option 38.
Example:
Switch#show ipv6 dhcp snooping option
remote-id option enable
subscriber-id option enable
The slot port vlan select option is : port and vlan
The delimiter is : #