mac

IPv4 Multicast Protocol
378
Chapter 33 IPv4 Multicast Protocol
33.1 Commands for DCSCM
33.1.1 access-list (Multicast Destination Control)
Command: access-list <6000-7999> {deny|permit} ip {{<source>
<source-wildcard>}|{host <source-host-ip>}|any-source} {{<destination>
<destination-wildcard>}|{host-destination
l<destination-host-ip>}|any-destination}
no access-list <6000-7999> {deny|permit} ip {{<source>
<source-wildcard>}|{host <source-host-ip>}|any} {{<destination>
<destination-wildcard>}|{host-destination
<destination-host-ip>}|any-destination}
Function: Configure destination control multicast access-list, the “no access-list
<6000-7999> {deny|permit} ip {{<source> <source-wildcard>}|{host
<source-host-ip>}|any-source} {{<destination>
<destination-wildcard>}|{host-destination <destination-host-ip>}|any-destination}”
command deletes the access-list.
Parameter: <6000-7999>: destination control access-list number.
{deny|permit}: deny or permit.
<source>: multicast source address.
<source-wildcard>: multicast source address wildcard character..
<source-host-ip>: multicast source host address.
<destination>: multicast destination address.
<destination-wildcard>: multicast destination address wildcard
character.
<destination-host-ip>: multicast destination host address
Default: None
Command Mode: Global Mode
Usage Guide: ACL of Multicast destination control list item is controlled by specifical
ACL number from 6000 to 7999, the command applies to configure this ACL. ACL of
Multicast destination control only needs to configure source IP address and destination
IP address controlled (group IP address), the configuration mode is basically the same to