mac

Commands for Basic Switch Configuration
37
1.1.6 config
Command: config [terminal]
Function: Enter Global Mode from Admin Mode.
Parameter: [terminal] indicates terminal configuration.
Command mode: Admin Mode
Example:
Switch#config
1.1.7 debug ssh-server
Command: debug ssh-server
no debug ssh-server
Function: Display SSH server debugging information; the “no debug ssh-server”
command stops displaying SSH server debugging information.
Default: This function is disabled by default.
Command mode: Admin Mode.
1.1.8 disable
Command: disable
Function: Disable admin mode.
Parameter: None.
Default: None.
Command mode: Admin Mode.
Usage Guide: None.
Example:
Switch#disable
Switch>
1.1.9 enable
Command: enable [<1-15>]
Function: Use enable command to enter Admin Mode from User Mode, or change the
privilege level of the users.
Command mode: User Mode/ Admin Mode.
Default: None.
Usage Guide: To prevent unauthorized access of non-admin user, user authentication is
required (i.e. Admin user password is required) when entering Admin Mode from User