mac

IPv4 Multicast Protocol
386
configuration
Example:
Switch#sh ip multicast source-control access-list
access-list 5000 permit ip 10.1.1.0 0.0.0.255 232.0.0.0 0.0.0.255
access-list 5000 deny ip 10.1.1.0 0.0.0.255 233.0.0.0 0.255.255.255
33.2 Commands for IGMP Snooping
33.2.1 clear ip igmp snooping vlan
Command: clear ip igmp snooping vlan <1-4094> groups [A.B.C.D]
Function: Delete the group record of the specific VLAN.
Parameters: <1-4094> the specific VLAN ID; A.B.C.D the specific group address.
Command Mode: Admin Configuration Mode
Usage Guide: Use show command to check the deleted group record.
Example: Delete all groups.
Switch#clear ip igmp snooping vlan 1 groups
Relative Command: show ip igmp snooping vlan <1-4094>
33.2.2 clear ip igmp snooping vlan <1-4094>
mrouter-port
Command: clear ip igmp snooping vlan <1-4094> mrouter-port [ethernet IFNAME |
IFNAME]
Function: Delete the mrouter port of the specific VLAN.
Parameters: <1-4094> the specific VLAN ID; ethernet the Ethernet port name; IFNAME
the port name.
Command Mode: Admin Configuration Mode
Usage Guide: Use show command to check the deleted mrouter port of the specific
VLAN.
Example: Delete mrouter port in vlan 1.
Switch# clear ip igmp snooping vlan 1 mrouter-port
Relative Command: show ip igmp snooping mrouter-port