mac

Commands for ACL
421
Switch(Config-Mac-Ext-Nacl-mac_acl)#
36.20 mac-ip access extended
Command: mac-ip-access-list extended <name>
no mac-ip-access-list extended <name>
Functions: Define a name-manner MAC-IP ACL or enter access-list configuration mode,
“no mac-ip-access-list extended <name>” command deletes this ACL.
Parameters: <name>: name of access-list excluding blank or quotation mark, and it
must start with letter, and the length cannot exceed 32 (remark: sensitivity on capital or
small letter).
Command Mode: Global Mode.
Default: No named MAC-IP access-list.
Usage Guide: After assigning this command for the first time, only an empty name
access-list is created and no list item included.
Examples: Create an MAC-IP ACL named macip_acl.
Switch(config)# mac-ip-access-list extended macip_acl
Switch(Config-MacIp-Ext-Nacl-macip_acl)#
36.21 permit | deny (ip extended)
Command: [no] {deny | permit} icmp {{<sIpAddr> <sMask>} | any-source |
{host-source <sIpAddr>}} {{<dIpAddr> <dMask>} | any-destination |
{host-destination <dIpAddr>}} [<icmp-type> [<icmp-code>]] [precedence <prec>]
[tos <tos>][time-range<time-range-name>]
[no] {deny | permit} igmp {{<sIpAddr> <sMask>} | any-source | {host-source
<sIpAddr>}} {{<dIpAddr> <dMask>} | any-destination | {host-destination
<dIpAddr>}} [<igmp-type>] [precedence <prec>] [tos
<tos>][time-range<time-range-name>]
[no] {deny | permit} tcp {{ <sIpAddr> <sMask> } | any-source | {host-source
<sIpAddr> }} [s-port { <sPort> | range <sPortMin> <sPortMax> }] {{ <dIpAddr>
<dMask> } | any-destination | {host-destination <dIpAddr> }} [d-port { <dPort> |
range <dPortMin> <dPortMax> }] [ack+fin+psh+rst+urg+syn] [precedence <prec> ]
[tos <tos> ][time-range <time-range-name> ]
[no] {deny | permit} udp {{ <sIpAddr> <sMask> } | any-source | {host-source
<sIpAddr> }} [s-port { <sPort> | range <sPortMin> <sPortMax> }] {{ <dIpAddr>
<dMask> } | any-destination | {host-destination <dIpAddr> }} [d-port { <dPort> |