mac

Commands for ACL
426
[no]{deny|permit}{any-source-mac|{host-source-mac <host_smac> }|{ <smac>
<smac-mask> }}{any-destination-mac|{host-destination-mac <host_dmac> }|
{ <dmac> <dmac-mask> }}udp{{ <source> <source-wildcard> }|any-source|
{host-source <source-host-ip> }}[s-port{ <port1> | range <sPortMin> <sPortMax> }]
{{ <destination> <destination-wildcard> }|any-destination| {host-destination
<destination-host-ip> }} [d-port { <port3> | range <dPortMin> <dPortMax> }]
[precedence <precedence> ] [tos <tos> ][time-range <time-range-name> ]
[no]{deny|permit}{any-source-mac|{host-source-mac<host_smac>}|{<smac>
<smac-mask>}}{any-destination-mac|{host-destination-mac<host_dmac>}|
{<dmac><dmac-mask>}}{eigrp|gre|igrp|ip|ipinip|ospf|{<protocol-num>}}
{{<source><source-wildcard>}|any-source|{host-source<source-host-ip>}}
{{<destination><destination-wildcard>}|any-destination|{host-destination
<destination-host-ip>}} [precedence <precedence>] [tos
<tos>][time-range<time-range-name>]
Functions: Define an extended name MAC-IP ACL rule, no form deletes one extended
numeric MAC-IP ACL access-list rule.
Parameters: num access-list serial No. this is a decimal’s No. from 3100-3199; deny if
rules are matching, deny to access; permit if rules are matching, permit to access;
any-source-mac: any source MAC address; any-destination-mac: any destination
MAC address; host_smac, smac: source MAC address; smac-mask: mask (reverse
mask) of source MAC address ; host_dmac , dmas destination MAC address;
dmac-mask mask (reverse mask) of destination MAC address; protocol No. of name or
IP protocol. It can be a key word: eigrp, gre, icmp, igmp, igrp, ip, ipinip, ospf, tcp, or udp,
or an integer from 0-255 of list No. of IP address. Use key word ‘ip’ to match all Internet
protocols (including ICMP, TCP, AND UDP) list; source-host-ip, source No. of source
network or source host of packet delivery. Numbers of 32-bit binary system with dotted
decimal notation expression; host: means the address is the IP address of source host,
otherwise the IP address of network; source-wildcard: reverse of source IP. Numbers of
32-bit binary system expressed by decimal’s numbers with four-point separated, reverse
mask; destination-host-ip, destination No. of destination network or host to which
packets are delivered. Numbers of 32-bit binary system with dotted decimal notation
expression; host: means the address is that the destination host address, otherwise the
network IP address; destination-wildcard: mask of destination. I Numbers of 32-bit
binary system expressed by decimal’s numbers with four-point separated, reverse mask;
s-port(optional): means the need to match TCP/UDP source port; port1(optional):
value of TCP/UDP source interface No., Interface No. is an integer from 0-65535;
<sPortMin>, the down boundary of source port; <sPortMax>, the up boundary of source