mac

Commands for Basic Switch Configuration
44
command cancels the encryption.
Command mode: Global Mode
Default: No service password-encryption by system default
Usage guide: The current unencrypted passwords as well as the coming passwords
configured by password, enable password, ip ftp and username command will be
encrypted by executed this command. no service password-encryption cancels this
function however encrypted passwords remain unchanged.
Example: Encrypt system passwords
Switch(config)#service password-encryption
1.1.25 service terminal-length
Command: service terminal-length <0-512>
no service terminal-length
Function: Configure the columns of characters displayed in each screen on terminal
(vty). The “no service terminal-length” command cancels the screen shifting operation.
Parameter: Columns of characters displayed on each screen of vty, ranging between
0-512.
Command mode: Global Mode
Usage guide: Configure the columns of characters displayed on each screen of the
terminal. The columns of characters displayed on each screen on the telent.ssh client
and the Console will be following this configuration.
Example: Set the number of vty threads to 20.
Switch(config)#service terminal-length 20
1.1.26 sysContact
Command: sysContact <LINE>
no sysContact
Function: Set the factory contact mode, the “no sysContact” command reset the switch
to factory settings.
Parameter: <LINE> is the prompt character string, range from 0 to 255 characters.
Command mode: Global Mode
Default: The factory settings.
Usage guide: The user can set the factory contact mode bases the fact instance.
Example: Set the factory contact mode to test.
Switch(config)#sysContact test
1.1.27 sysLocation