mac

Commands for 802.1x
452
38.31 dot1x web redirect enable
This command is not supported by switch.
38.32 show dot1x
Command: show dot1x [interface <interface-list>]
Function: Displays dot1x parameter related information, if parameter information is
added, corresponding dot1x status for corresponding port is displayed.
Parameters: <interface-list> is the port list. If no parameter is specified, information for
all ports is displayed.
Command mode: Admin and Configuration Mode.
Usage Guide: The dot1x related parameter and dot1x information can be displayed with
“show dot1x” command.
Example:
1. Display information about dot1x global parameter for the switch.
Switch#show dot1x
Global 802.1x Parameters
reauth-enabled no
reauth-period 3600
quiet-period 10
tx-period 30
max-req 2
authenticator mode passive
Mac Filter Disable
MacAccessList :
dot1x-EAPoR Enable
dot1x-privateclient Disable
dot1x-unicast Disable
802.1x is enabled on ethernet Ethernet1/1
Authentication Method:Port based
Max User Number:1
Status Authorized
Port-control Auto