mac

Commands for RADIUS
470
43.5 debug aaa detail attribute
Command: debug aaa detail attribute interface {ethernet <interface-number> |
<interface-name>}
no debug aaa detail attribute interface {ethernet <interface-number> |
<interface-name>}
Function: Enable the debug information of AAA about Radius attribute details; the no
operation of this command will disable that debug information.
Parameters: <interface-number>: the number of the interface.
<interface-name>: the name of the interface.
Command Mode: Admin Mode.
Usage Guide: By enabling the debug information of AAA about Radius attribute details,
users can check Radius attribute details of Radius messages, which might help
diagnose the cause of faults if there is any.
Example: Enable the debug information of aaa about Radius attribute details on
interface 1/1.
Switch#debug detail attribute interface Ethernet 1/1
43.6 debug aaa detail connection
Command: debug aaa detail connection
no debug aaa detail connection
Function: Enable the debug information of aaa about connection details; the no
operation of this command will disable that debug information.
Parameters: None.
Command Mode: Admin Mode.
Usage Guide: By enabling the debug information of aaa about connection details, users
can check connection details of aaa, which might help diagnose the cause of faults if
there is any.
Example: Enable the debug information of aaa about connection details.
Switch#debug aaa detail connection
43.7 debug aaa detail event
Command: debug aaa detail event
no debug detail event
Function: Enable the debug information of aaa about events; the no operation of this