mac

Commands for RADIUS
477
RADIUS server at the configured interval.
The interval of sending fee-counting update messages is relative to the maximum
number of users supported by NAS. The smaller the interval, the less the maximum
number of the users supported by NAS; the bigger the interval, the more the maximum
number of the users supported by NAS. The following is the recommended ratio of
interval of sending fee-counting update messages to the maximum number of the users
supported by NAS:
Table 8-1 The recommended ratio of the interval of sending fee-counting update
messages to the maximum number of the users supported by NAS
The maximum number of users
The interval of sending fee-counting update
messages(in seconds)
1~299
300（default value）
300~599
600
600~1199
1200
1200~1799
1800
≥1800
3600
Example: The maximum number of users supported by NAS is 700, the interval of
sending fee-counting update messages 1200 seconds.
Switch(config)#radius-server accounting-interim-update timeout 1200
43.18 show aaa authenticated-user
Command: show aaa authenticated-user
Function: Displays the authenticated users online.
Command mode: Admin and Configuration Mode.
Usage Guide: Usually the administrator concerns only information about the online user,
the other information displayed is used for troubleshooting by technical support.
Example:
Switch#show aaa authenticated-user
------------------------- authenticated users -------------------------------
UserName Retry RadID Port EapID ChapID OnTime UserIP MAC
-----------------------------------------------------------------------------
--------------- total: 0 ---------------