mac

Commands for MAB
486
Chapter 46 Commands for MAB
46.1 authentication mab
Command: authentication mab {radius | none}
no authentication mab
Function: Configure the authentication mode and priority of MAC address
authentication, the no command restores the default authentication mode.
Parameters: radius means RADIUS authentication mode, none means the
authentication is needless.
Default: Using RADIUS authentication mode.
Command Mode: Global mode
Usage Guide: none option is used to the fleeing function of MAC address authentication.
If all configured RADIUS servers don’t respond, switch will adopt none authentication
mode to allow that MAC address authentication users access the network directly.
Example: Configure the fleeing function of MAC address authentication.
Switch(config)#authentication mab radius none
46.2 clear mac-authentication-bypass binding
Command: clear mac-authentication-bypass binding {mac WORD | interface
(ethernet IFNAME | IFNAME) | all}
Function: Clear MAB binding information.
Parameters: MAC: Delete MAB binding of the specified MAC address
IFNAME: Delete MAB binding of the specified port
all: Delete all MAB binding
Command Mode: Admin Mode
Default: None.
Usage Guide: None.
Example: Delete all MAB binding.
Switch#clear mac-authentication-bypass binding all
46.3 debug mac-authentication-bypass
Command: debug mac-authentication-bypass {packet | event | binding}