mac

Commands for Basic Switch Configuration
48
Privilege is : 15
1.1.36 show tcam usage
This command is not supported by the switch.
1.1.37 show temperature
This command is not supported by the switch.
1.1.38 show tech-support
Command: show tech-support [no-more]
Function: Display the operational information and the task status of the switch. The
technique specialist use this command to diagnose whether the switch operate normally.
Parameter: no-more: Display the operational information and the task status of the
switch directly, do not connect the user by “more”.
Command mode: Admin and Configuration Mode.
Usage Guide: This command is used to collect the relative information when the switch
operation is malfunctioned.
Example:
Switch#show tech-support
1.1.39 show version
Command: show version
Function: Display the version information of the switch.
Command mode: Admin and Configuration Mode.
Usage Guide: This command is used to show the version of the switch, it includes the
hardware version and the software version information.
Example:
Switch#show version.
1.1.40 username
Command: username <username> [privilege <privilege>] [password [0 | 7]
<password>]
no username <username>
Function: Configure local login username and password along with its privilege level.
Parameter: <username> is the username, its range should not exceed 32 characters.