mac

Commands for PPPoE Intermediate Agent
495
47.5 pppoe intermediate-agent delimiter
Command: pppoe intermediate-agent delimiter <WORD>
no pppoe intermediate-agent delimiter
Function: Configure the delimiter among the fields in circuit-id and remote-id, the no
command cancels the configuration.
Parameter: <WORD>: the delimiter, its range is (#|.|,|;|:|/|space).
Command Mode: Global mode
Default: The fields is comparted with ’\0’.
Usage Guide: After configuring the delimiter, the added fields of circuit-id and remote-id
use the configured delimiter to compart. Notice: The global pppoe intermediate-agent
function must be enabled.
Example: Configure the delimiter.
Switch(config)#pppoe intermediate-agent delimiter space
47.6 pppoe intermediate-agent format
Command: pppoe intermediate-agent format (circuit-id | remote-id) (hex | ascii)
no pppoe intermediate-agent format (circuit-id | remote-id)
Function: Configure the format with hex or ASCII for circuit-id and remote-id, the no
command cancels the configuration.
Parameter: hex: hexadecimal
ascii: ASCII code
Command Mode: Global mode
Default: This configuration is null.
Usage Guide: Encapsulation circuit-id and remote-id with hex ASCII format to vendor
tag. Notice: The global pppoe intermediate-agent function must be enabled.
Example: Configure the trust port 1/1 to enable vendor-tag strip function.
Switch(config)#pppoe intermediate-agent format remote-id ascii
47.7 pppoe intermediate-agent remote-id
Command: pppoe intermediate-agent remote-id <string>
no pppoe intermediate-agent remote-id <string>
Function: Configure remote-id of the port, the no command cancels this configuration.
Parameter: <string>: remote-id, the max character number is 63 bytes.
Command Mode: Port mode