mac

Commands for PPPoE Intermediate Agent
496
Default: This configuration is null.
Usage Guide: Configure remote-id for each port, if there is no configuration, use
switch’s MAC as remote-id value.
Example: Configure remote-id as abcd on port ethernet1/2.
Switch(config-if-ethernet1/2)# pppoe intermediate-agent remote-id abcd
47.8 pppoe intermediate-agent trust
Command: pppoe intermediate-agent trust
no pppoe intermediate-agent trust
Function: Configure the port as trust port, the no command configures the port as
untrust port.
Parameter: None.
Command Mode: Port mode
Default: Untrust port.
Usage Guide: The port which connect to server must be configured as trust port. Note:
At least one trust port is connected to PPPoE server.
Example: Configure port ethernet1/1 as trust port.
Switch(config-if-ethernet1/1)#pppoe intermediate-agent trust
47.9 pppoe intermediate-agent type self-defined
circuit-id
Command: pppoe intermediate-agent type self-defined circuit-id {vlan | port | id
(switch-id (mac | hostname) | remote-mac) | string WORD}
no pppoe intermediate-agent type self-defined circuit-id
Function: Configure the self-defined circuit-id, the no command cancels the
configuration.
Parameter: vlan: VLAN ID
port: Port ID
id switch-id mac: the local MAC address
id switch-id hostname: the local host name
id remote-mac: the remote MAC address
string WORD: the specified keyword
Command Mode: Global mode
Default: This configuration is null.
Usage Guide: This configuration and type tr-101 circuit-id are mutually exclusive, it will