mac

Commands for Basic Switch Configuration
49
<privilege> is the maximum privilege level of the commands that the user is able to
execute, its value is limited between 1 and 15, and 1 by default. <password> is the
password for the user. If input option 0 on password setting, the password is not
encrypted; if input option 7, the password is encrypted (Use 32 bits password encrypted
by MD5).
Command Mode: Global Mode.
Usage Guide: There are two available choices for the preferences of the registered
commands in the switch. They are 1 and 15. Preference of 1 is for the commands of the
normal user configuration mode. Preference of 15 is for the commands registered in
modes other than the normal user configuration modes. 16 local users at most can be
configured through this command, and the maximum length of the password should be
no less than 32.
Notice: The user can log in user and priority after the command configures, before
issuing the command authentication line console login local, it should be made sure that
at one user has be configured as preference level of 15, in order to login the switch and
make configuration changes in privileged mode and global mode. If there are no
configured local users with preference level of 15, while only Local authentication is
configured for the Console login method, the switch can be login without any
authentication. When using the HTTP method to login the switch, only users with
preference level of 15 can login the switch, users with preference level other than 15 will
be denied.
Example: Configure an administrator account named admin, with the preference level
as 15. And configure two normal accounts with its preference level as 1. Then enable
local authentication method.
Above all the configurations, only the admin user is able to login the switch in
privileged mode through Telnet or Console login method, user1 and user2 can only login
the switch in normal user mode through the telnet and console login method. For HTTP
login method, only the admin user can pass the authentication configuration, user1 and
user2 will be denied.
Switch(config)#username admin privilege 15 password 0 admin
Switch(config)# username user1 privilege 1 password 7
4a7d1ed414474e4033ac29ccb8653d9b (The password is 32 bits password encrypted
by MD5)
Switch(config)# username user2 password 0 user2
Switch(config)# authentication line console login local
1.1.41 web language
Command: web language {chinese | english}