mac

Commands for Web Portal Configuration
503
<NULL> 0 packet binding debug is on
48.3 debug webportal error
Command: debug webportal error
no debug webportal error
Function: Enable/ disable the error debugging of web portal authentication.
Parameter: None.
Command Mode: Admin Mode.
Default: There is no limitation.
Usage Guide: Enable the error debugging of web portal authentication, the no
command disables the error debugging.
Example: Enable the error debugging of web portal authentication.
switch#debug webportal error
<NULL> 0 error error debug is on
48.4 debug webportal event
Command: debug webportal event
no debug webportal event
Function: Enable/ disable the event debugging of web portal authentication.
Parameter: None.
Command Mode: Admin Mode.
Default: There is no limitation.
Usage Guide: Enable the event debugging of web portal authentication, the no
command disables the event debugging.
Example: Enable the event debugging of web portal authentication.
switch#debug webportal event
<NULL> 0 event event debug is on
48.5 debug webportal packet
Command: debug webportal packet {all | receive | send} {interface <ethernet
IFNAME | IFNAME> |}
no debug webportal packet {all | receive | send} {interface
<interface-name> |}
Function: Enable/ disable the debugging that show the synchronization information of