mac

Commands for Web Portal Configuration
505
Function: Show the parameter and enable information of web portal authentication.
Parameter: <ethernet IFNAME | IFNAME>: The port name, if the port name is null,
show all port information.
Command Mode: Admin Mode.
Default: There is no limitation.
Usage Guide: Show the parameter and enable information of web portal authentication
according to the condition.
Example: Show the parameter and enable information of web portal authentication.
switch#show webportal interface ethernet 1/1
webportal enable
webportal binding-limit 128
48.8 show webportal binding
Command: show webportal binding {interface <ethernet IFNAME | IFNAME> |}
Function: Show the binding information of web portal authentication.
Parameter: <ethernet IFNAME | IFNAME>: The port name, the name or ID of the port
may be null.
Command Mode: Admin Mode.
Default: There is no limitation.
Usage Guide: Collect the binding information according to the specified condition, such
as the binding number, IP, MAC, interface, VLAN ID and state, etc.
Example: Show the binding information of web portal authentication.
switch#show webportal binding ?
interface Interface setting
| Output modifiers
<cr>
switch#show webportal binding interface ethernet 1/1
Interface Ethernet1/1 user config:
webportal enable: Enable
Binding info: 0
--------------------------------------------------------
IP MAC Interface Vlan ID
----------------------------------------------------------------------------------------------------------