mac

Commands for Basic Switch Configuration
50
Function: Set the language for displaying the HTTP Server information.
Parameter: chinese for Chinese display; english for English display.
Command mode: Admin Mode
Default: The default setting is English display.
Usage Guide: The user can select the language according to their preference.
1.1.42 write
Command: write
Function: Save the currently configured parameters to the Flash memory.
Command mode: Admin Mode.
Usage Guide: After a set of configuration with desired functions, the setting should be
saved to the specified configuration file, so that the system can revert to the saved
configuration automatically in the case of accidentally powered off or power failure. This
is the equivalent to the copy running-config startup-config command.
1.1.43 write running-config
Command: write running-config [<startup-config-file-name>]
Function: Save the current running config as .cfg file to Flash Memory.
Parameters: <startup-config-file-name> is the full path of the cfg file. The format of
which is as follows:
1. The file path comprises of two parts: device prefix used as the root directory
(flash:/) and the file name. No space is allowed in each part or between two parts.
2. The suffix of all file names should be .cfg.
3. The length of the full file path should not be longer than 128 characters, while the
file name cannot be longer than 80 characters.
Command Mode: Admin Mode.
Usage Guide: Config file saved by Flash Memory can be used for startup file.
Example: Save the current running config as .cfg file with name of 123.
Switch#write running-config 123.cfg
1.2 Commands for Telnet
1.2.1 accounting exec
Command: accounting line {console | vty} exec {start-stop | stop-only | none}