mac

Commands for Basic Switch Configuration
51
method1 [method2…]
no accounting line {console | vty} exec
Function: Configure the list of the accounting method for the login user with VTY (login
with Telnet and SSH) and Console. The no command restores the default accounting
method.
Parameters: line selects the accounting line, including console, vty (telnet and ssh);
start-stop sends the accounting start or the accounting stop when the user is logging or
exit the login; stop-only sends the accounting stop when the user exits the login only;
none does not send the accounting start or the accounting stop; method is the list of the
accounting method, it only supports tacacs keyword; tacacs uses the remote TACACS+
server to count.
Default: There is no accounting.
Command Mode: Global Mode.
Usage Guide: console and vty login method are able to set the corresponding
accounting method respectively, the accounting method only supports TACACS+
method currently.
Example: Configure the login accounting with the telnet method.
Switch(config)#accounting line vty exec start-stop tacacs
1.2.2 accounting command
Command: accounting line {console | vty} command <1-15> {start-stop | stop-only
| none} method1 [method2…]
no accounting line {console | vty} command <1-15>
Function: Configure the list of the command accounting method with VTY (login with
Telnet and SSH) and Console. The no command restores the default accounting
method.
Parameters: line selects the accounting line, including console, vty (telnet and ssh);
command <1-15> is the level of the accounting command; start-stop sends the
accounting start or the accounting stop when the user is logging or exit the login;
stop-only sends the accounting stop when the user exits the login only; none does not
send the accounting start or the accounting stop; method is the list of the accounting
method, it only supports tacacs keyword; tacacs uses the remote TACACS+ server to
count.
Default: There is no accounting method.
Command Mode: Global Mode.
Usage Guide: console and vty login method are able to set the corresponding
command accounting method respectively, the accounting method only supports
TACACS+ method currently. Only the stop information of the accounting is recorded,