mac

Commands for SAVI
520
50.1.13 savi max-dad-prepare-delay
Command: savi max-dad-prepare-delay <max-dad-prepare-delay>
no savi max-dad-prepare-delay
Function: Configure lifetime period of redetection for the dynamic binding, no command
restores the default value.
Parameter: max-dad-prepare-delay: set the ranging between 1 and 65535 seconds, its
default value is 1 second.
Command Mode: Global Mode.
Default: 1 second.
Usage Guide: It is recommended to user the default value.
Example: Set the redetection lifetime as 2 seconds.
Switch(config)#savi max-dad-prepare-delay 2
50.1.14 savi max-slaac-life
Command: savi max-slaac-life <max-slaac-life>
no savi max-slaac-life
Function: Configure lifetime period of slaac dynamic binding at BOUND state, no
command restores the default value.
Parameter: max-slaac-life: set the ranging between 1 and 31536000 seconds, its
default value is 4 hours.
Command Mode: Global Mode.
Default: 4 hours.
Usage Guide: None.
Example: Configure lifetime period of slaac binding type as 2010 seconds at BOUND
state.
Switch(config)#savi max-slaac-life 2010
50.1.15 savi timeout bind-protect
Command: savi timeout bind-protect <protect-time>
no savi timeout bind-protect
Function: Configure the bind-protect lifetime period for a port after its state from up to
down, no command restores the default value.
Parameter: protect-time: set the ranging between 1 and 300 seconds, its default value
is 30 seconds.
Command Mode: Global Mode.
Default: 30 seconds.