mac

Commands for SAVI
521
Usage Guide: After the configured lifetime period is overtime, the port is still at down
state, the binding of this port will be deleted. If the port state is changed from down to up
state during the configured lifetime period, the binding of the port will reset it as lifetime
period of BOUND state. If the configured parameter is 0 second, all binding of the port
will be deleted immediately.
Example: Set bind-protect lifetime period to be 20 seconds.
Switch(config)#savi timeout bind-protect 20
50.2 Commands for Monitor and Debug
50.2.1 Monitor and Debugg
50.2.1.1 debug ipv6 dhcp snooping binding
Command: debug ipv6 dhcp snooping binding
no debug ipv6 dhcp snooping binding
Function: Enable binding debug of dhcp type for SAVI, no command disables the
debug.
Parameter: None.
Command Mode: Admin Mode.
Default: None.
Usage Guide: After enable this function, the relative binding of dhcp type or static type
create the print information for misarranging. The no command disables this function.
Example: Enable the binding debug of dhcp type.
Switch#debug ipv6 dhcp snooping binding
50.2.1.2 debug ipv6 dhcp snooping event
Command: debug ipv6 dhcp snooping event
no debug ipv6 dhcp snooping event
Function: Enable event debug of dhcp type for SAVI, no command disables the debug.
Parameter: None.
Command Mode: Admin Mode.
Default: None.
Usage Guide: After enable event debug, the relative event information of dhcp type will
be print for misarranging. The no command disables this function.
Example: Enable binding event debug of dhcp type.
Switch#debug ipv6 dhcp snooping event