mac

Commands for SAVI
523
Switch#debug ipv6 nd snooping event
50.2.1.6 debug ipv6 nd snooping packet
Command: debug ipv6 nd snooping packet
no debug ipv6 nd snooping packet
Function: Enable ND packets debug, no command disables ND packets debug.
Parameter: None.
Command Mode: Admin Mode.
Default: None.
Usage Guide: After enable packets debug, the relative ND packets will be print for
misarranging. The no command disables this function.
Example: Enable ND packets debug.
Switch#debug ipv6 nd snooping packet
50.2.1.7 show savi ipv6 check source binding
Command: show savi ipv6 check source binding [interface<if-name>]
Function: Show the global SAVI binding entry list.
Parameter: if-name: port name such as interface ethernet 1/1.
Command Mode: Admin Mode.
Default: None.
Usage Guide: Descriptions of each field are as below:
Field
Description
MAC
The bound MAC address
IP
The bound IP address
Vlan
The binding VLAN belongs to
Port
The binding port belongs to
Type
Binding type
State
Binding state
Expires
The bound lifetime period
Example: Show the global binding state of SAVI.
Switch(config)#show savi ipv6 check source binding
Static binding count: 0
Dynamic binding count: 3
Binding count: 3