mac

Commands for MRPP
529
51.9 mrpp enable
Command: mrpp enable
no mrpp enable
Function: Enable MRPP protocol module, the “no mrpp enable” command disables
MRPP protocol.
Parameter: None.
Command Mode: Global Mode.
Default: The system doesn’t enable MRPP protocol module.
Usage Guide: If it needs to configure MRPP ring, it enables MRPP protocol. Executing
“no mrpp enable” command, it ensures to disable the switch enabled MRPP ring.
Example: Globally enable MRPP.
Switch(config)#mrpp enable
51.10 mrpp errp compatible
Command: mrpp errp compatible
no mrpp errp compatible
Function: Enable the compatible mode for ERRP, the no command disables the
compatible mode.
Parameter: None.
Command Mode: Global mode
Default: Disable the compatible function of ERRP.
Usage Guide: If the compatible function of ERRP needs to be configured, MRPP
protocol should be enabled firstly. Furthermore, the port with ERRP compatible mode
should be configured as hybrid or trunk mode and allow the packets with Control Vlan
information.
Example: Enable the compatible function of ERRP globally.
Switch(Config)#mrpp enable
Switch(Config)#mrpp errp compatible
Switch(Config)#mrpp ring 2
Switch(mrpp-ring-2)#control-vlan 4000
Switch(config-if-ethernet1/51)#switchport mode hybrid
Switch(config-if-ethernet1/51)#switchport hybrid allowed vlan 4000 tag
Switch(config-if-ethernet1/52)#switchport mode hybrid
Switch(config-if-ethernet1/52)#switchport hybrid allowed vlan 4000 tag