mac

Commands for MRPP
530
51.11 mrpp poll-time
Command: mrpp poll-time <20-2000>
Function: Configure the query interval of MRPP.
Command mode: Global mode.
Usage Guide: Configure the query time to adjust the query interval of MRPP, the default
interval is 100ms.
Example: Set the query time as 200ms.
Switch(Config)# mrpp poll-time 200
51.12 mrpp ring
Command: mrpp ring <ring-id>
no mrpp ring <ring-id>
Function: Create MRPP ring, and access MRPP ring mode, the “no mrpp
ring<ring-id>” command deletes configured MRPP ring.
Parameter: <ring-id> is MRPP ring ID, the valid range is from 1 to 4096.
Command Mode: Global Mode
Usage Guide: If this MRPP ring doesn’t exist it create new MRPP ring when executing
the command, and then it enter MRPP ring mode. It needs to ensure disable this MRPP
ring when executing the “no mrpp ring” command.
Example:
Switch(config)#mrpp ring 100
51.13 mrpp ring primary-port
Command: mrpp ring <ring-id> primary-port
no mrpp ring <ring-id> primary-port
Function: Specify MRPP ring primary-port.
Parameter: <ring-id> is the ID of MRPP ring; range is <1-4096>.
Command Mode: Port mode
Default: None
Usage Guide: The command specifies MRPP ring primary port. Primary node uses
primary port to send Hello packet, secondary port is used to receive Hello packet from
primary node. There are no difference on function between primary port and secondary
of secondary node.