mac

Commands for ULPP
534
52.3 debug ulpp error
Command: debug ulpp error
no debug ulpp error
Function: Show the error information of ULPP. The no operation disables showing the
error information of ULPP.
Parameter: None.
Default: Do not display.
Command mode: Admin mode.
Usage Guide: None.
Example: Show the error information of ULPP.
Switch# debug ulpp error
Unrecognized Flush packet received.
52.4 debug ulpp event
Command: debug ulpp event
no debug ulpp event
Function: Show the event information of ULPP. The no operation disables showing the
event information of ULPP.
Parameter: None.
Default: Do not display.
Command mode: Admin mode.
Usage Guide: None.
Example: Show the event information of ULPP.
Switch# debug ulpp event
ULPP group 1 state changes:
Master port ethernet 1/1 in ULPP group 1 changed state to Forwading.
Slave port ethernet 1/2 in ULPP group 1 changed state to Standby.
52.5 debug ulpp flush content interface
Command: debug ulpp flush content interface <name>
no debug ulpp flush content interface <name>
Function: Show the contents of the receiving flush packets. The no operation disables
the shown contents.
Parameter: <name> is the name of the port.