mac

Commands for ULPP
539
VLANs are not protected, the different ULPP groups can’t quote the same instance.
Example: Configure the protective VLAN quoted from instance 1 for ULPP group.
Switch(config)# ulpp group 20
Switch(ulpp-group-20)# protect vlan-reference-instance 1
52.15 show ulpp flush counter interface
Command: show ulpp flush counter interface {ethernet <IFNAME> | <IFNAME>}
Function: Show the statistic information of the flush packets.
Parameter: <IFNAME> is the name of the ports.
Default: None.
Command mode: Admin mode.
Usage Guide: Show the statistic information of the flush packets, such as: the
information of the flush packets number which has been received, the time information
that receive the flush packets finally.
Example: Show the statistic information of the flush packets for ULPP group1.
Switch# show ulpp flush counter interface e1/1
Received flush packets: 10
52.16 show ulpp flush-receive-port
Command: show ulpp flush-receive-port
Function: Show the port which receive flush packet, flush type and control VLAN.
Parameter: None.
Default: None.
Command mode: Admin mode.
Usage Guide: None.
Example: Show the information that the port receives flush packets.
Switch# show ulpp flush-receive-port
ULPP flush-receive portlist:
Portname Type Control Vlan
------------------------------------------------
Ethernet1/1 ARP 1
Ethernet1/3 MAC 1;3;5-10