mac

Commands for ULSM
544
Chapter 53 Commands for ULSM
53.1 debug ulsm event
Command: debug ulsm event
no debug ulsm event
Function: Show the event information of ULSM. The no operation disables showing
ULSM events.
Parameter: None.
Default: None.
Command mode: Admin Mode.
Usage Guide: None.
Example: Show the event information of ULSM.
Switch# debug ulsm event
Downlink synchoronized with ULSM group, change state to Down.
53.2 show ulsm group
Command: show ulsm group [group-id]
Function: Show the configuration information of ULSM group.
Parameter: [group-id]: the ID of ULSM group.
Default: By default, show the information of all ULSM groups which have been
configured.
Command mode: Admin Mode.
Usage Guide: None.
Example: Show the configuration information of ULSM group1.
Switch# show ulsm group 1
ULSM group 1 information:
ULSM group state: Down
Member Role State Down by ULSM
---------------------------------------------------------------------------------------------
ethernet1/1 UpLINK Down
ethernet1/2 DownLINK Down Yes