mac

Commands for Mirroring Configuration
548
destination of the interface is re-configured.
Example: Configure interface 1/7 as the destination of the mirror.
Switch(config)#monitor session 1 destination interface ethernet 1/7
54.4 show monitor
Command: show monitor
Function: To display information about the source and destination ports of all the
mirror sessions.
Command Mode: Admin Mode
Usage Guide: This command is used to display the source and destination ports for the
configured mirror sessions. For port mirroring, CPU mirroring, and flow mirroring, the
mirror mode of the source can be displayed.
Example:
Switch#show monitor