mac

Commands for NTP
558
57.3 debug ntp authentication
Command: debug ntp authentication
no debug ntp authentication
Function: To display NTP authentication information, the no form command disabled the
switch of displaying NTP authentication information.
Parameter: None.
Default: Disabled.
Command Mode: Admin Mode.
Usage Guide: To display NTP authentication information, if the switch is enabled, and if
the packets schlepped authentication information when the packet in sending or
receiving process, then the key identifier will be printed out.
Example: To enable the switch of displaying NTP authentication information.
Switch# debug ntp authentication
57.4 debug ntp events
Command: debug ntp events
no debug ntp events
Function: To enable/disable debug switch of displaying NTP event.
Parameter: None.
Default: Disable the debug switch of displaying NTP event.
Command Mode: Admin Mode.
Usage Guide: To enable debug switch of displaying NTP event, after that, if some server
changed from available to unavailable or from unavailable to available, the received
illegal packet events will be printed.
Example: To enable debug switch of displaying NTP event information.
Switch# debug ntp events
57.5 debug ntp packet
Command: debug ntp packet [send | receive]
no debug ntp packet [send | receive]
Function: To enable/disable the debug switch of displaying NTP packet information.
Parameter: send: The debug switch of sending NTP packet.
receive: The debug switch of receiving NTP packet.