mac

Commands for NTP
560
57.8 ntp authenticate
Command: ntp authenticate
no ntp authenticate
Function: To enable/cancel NTP authentication function.
Parameter: None.
Default: Disabled.
Command Mode: Global Mode.
Usage Guide: None.
Example: To enable NTP authentication function.
Switch(config)#ntp authenticate
57.9 ntp authentication-key
Command: ntp authentication-key <key-id> md5 <value>
no ntp authentication-key <key-id>
Function: To enable/cancel NTP authentication function, and defined NTP
authentication key.
Parameter: key-id: The id of key, range is from 1 to 4294967295.
value: The value of key, range between 1 to 16 of ascii code.
Default: The authentication key of NTP authentication is not configured by default.
Command Mode: Global Mode.
Usage Guide: None.
Example: To define the authentication key of NTP authentication, the key-id is 20, the
md5 is abc.
Switch(config)# ntp authentication-key 20 md5 abc
57.10 ntp broadcast client
This command is not supported by the switch.
57.11 ntp broadcast server count
Command: ntp broadcast server count <number>