mac

Commands for Summer Time
567
value, the value as “Sun”, “Mon”, “Tue”, “Wed”, “Thu”, “Fri”, “Sat”; <month> is the month,
the value as ”Jan”, “Feb”, “Mar”, “Apr”, “May”, ”Jun”, “Jul”, “Aug”, “Sep”, “Oct”, “Nov”,
“Dec” <offset> is the time offset, the range from 1 to 1440, unit is minute, default value is
60 minutes.
Default: There is no summer time range.
Command Mode: Global Mode
Usage Guide: This command sets the start and end time for the recurrent summer time
flexibly. When the system time reaches to the start time point of summer time, the clock
is changed and increase <offset> value, the system enters summer time. When the
system time reaches to the end time point of summer time, the clock is changed again,
subtract <offset> value from system time, the system finishes summer time. There is no
relation between the recurrent summer time to the year, the system clock will be
changed when it reaches to the start and the end time point of summer time year after
year. This command supports summer time of southern hemisphere.
Example: Configure summer time at 12:10 from the first Monday of april to the last
Saturday of augest year after year, offset value as 70 minutes, summer time is named as
aaa.
Switch(config)#clock summer-time aaa recurring 12:10 1 mon apr 12:10 last sat aug 70