mac

Commands for Show
574
by default.
Timeout in milli-seconds[2000]
Timeout for ping command. 2 seconds by
default.
Extended commands[n]
Extended configuration. Disabled by default.
!
The network is reachable.
.
The network is unreachable.
Success rate is 100 percent(8/8),
round-trip min/avg/max = 1/1/1ms
Statistic information, success rate is 100
percent of ping packet.
59.9 show boot-files
Command: show boot-files
Function: Display the first and second IMG files and the CFG file enabled by switch.
Command Mode: Admin and Configuration Mode.
Usage Guide: After implementing this command, the booting sequence of IMG files in
the corresponding storage device, which IMG file is currently used in booting, the
configuration information of the CFG file in the storage device and the CFG file currently
booted.
Example: Display the first and second IMG files and the CFG file enabled by switch.
Switch#show boot-files
Booted files on switch
The primary img file at the next boot time: flash:/nos.img
The backup img file at the next boot time: flash:/nos.img
Current booted img file: flash:/nos.img
The startup-config file at the next boot time: flash:/startup.cfg
Current booted startup-config file: flash:/startup.cfg
If the CFG file of the next booting is set as NULL, the CFG part mentioned above will be
displayed as follows:
The startup-config file at the next boot time: NULL
Current booted startup-config file: flash:/startup.cfg