mac

Commands for Show
575
59.10 show debugging
Command: show debugging {l4 | l4drv | lldp | nsm | other | spanning-tree}
Function: Display the debug switch status.
Usage Guide: If the user needs to check what debug switches have been enabled,
show debugging command can be executed.
Command mode: Admin Mode
Example: Check for currently nsm debug switch state.
Switch#show debugging nsm
NSM debugging status
Relative command: debug
59.11 show fan
This command is not supported by switch.
59.12 show flash
Command: show flash
Function: Show the size of the files which are reserved in the system flash memory.
Command Mode: Admin Mode and Configuration Mode.
Example: To list the files and their size in the flash.
Switch#show flash
boot.rom 329, 828 1900-01-01 00:00:00 --SH
boot.conf 94 1900-01-01 00:00:00 --SH
nos.img 2, 449, 496 1980-01-01 00:01:06 ----
startup-config 2, 064 1980-01-01 00:30:12 ----
59.13 show history
Command: show history
Function: Display the recent user command history.
Command mode: Admin Mode
Usage Guide: The system holds up to 20 commands the user entered, the user can use
the UP/DOWN key or their equivalent (ctrl+p and ctrl+n) to access the command history.
Example: