mac

Commands for Show
576
Switch#show history
enable
config
interface ethernet 1/3
enable
dir
show ftp
59.14 show history all-users
Command: show history all-users [detail]
Function: Show the recent command history of all users.
Parameter: [detail] shows user name of the executing command. IP address of the user
will be shown when logging in the executing command through Telnet or SSH.
Command Mode: Admin and configuration mode
Usage Guide: This command is used to show the recent command history of all users,
including time, logging type, executing command, etc.
Notice: The user can only check the command history of other users whose purview
should not be higher than oneself.
Example:
Switch(config)#show history all-users detail
Time Type User Command
0w 0d 0h 2m Telnet/SSH admin show history all-users detail
192.168.1.2:1419
0w 0d 0h 1m Telnet/SSH admin show history all-users 192.168.1.2:1419
0w 0d 0h 1m Console Null show history all-users
0w 0d 0h 1m Console Null end
0w 0d 0h 1m Console Null ip address 192.168.1.1 255.255.255.0
0w 0d 0h 0m Console Null in v 1
0w 0d 0h 0m Console Null telnet-server enable
59.15 show logging buffered
Command: show logging buffered [level {critical | warnings} | range <begin-index>
<end-index>]
Function: This command displays the detailed information in the log buffer channel.
This command is not supported on low end switches.