mac

Commands for Show
577
Parameter:level {critical | warnings} means the level of critical information.
<begin-index> is the index start value of the log message, the valid range is 1-65535,
<end-index> is the index end value of the log message, and the valid range is 1-65535.
When only display logging buffered information of the line card must be added range
parameter, but the main control has not the request.
Command Mode: Admin and Configuration Mode.
Default: No parameter specified indicates all the critical log information will be displayed.
Usage Guide: Warning and critical log information is saved in the buffer zone. When
displayed to the terminal, their display format should be: index ID time <level> module ID
[mission name] log information.
Example 1: Display the critical log information in the log buffer zone channel and related
to the main control with index ID between 940 and 946.
Switch#show logging buffered level critical range 940 946
Example 2: Display all the information which level is warning and above in the log buffer
zone channel.
Switch#show logging buffered level warning
59.16 show logging executed-commands state
Command: show logging executed-commands state
Function: Show the state of logging executed-commands.
Parameter: None.
Command Mode: Admin mode.
Default: None.
Usage Guide: Use this command to display the state (enable or disable).
Example:
Switch#show logging executed-commands state
Logging executed command state is enable
59.17 show logging source
Command: show logging source mstp
Function: Show the log information source of MSTP module.
Parameters: None.
Default: None.
Command mode: Admin and configuration mode.
Usage Guide: Check the log information source (include information channel, the