mac

Commands for Show
583
59.28 show udp ipv6
Command: show udp ipv6
Function: Show the current UDP connection.
Command mode: Admin and configuration mode.
Example:
LocalAddress LocalPort RemoteAddress RemotePort State
:: 69 :: 0 CLOSED
:: 1208 :: 0 CLOSED
Displayed Information
Explanation
LocalAddress
Local IPv6 address of UDP connection
LocalPort
Local port of UDP connection
RemoteAddress
Remote IPv6 address of UDP connection
RemotePort
Remote Port of UDP connection
State
The current state of UDP connection
59.29 show version
Command: show version
Function: Display the switch version.
Command mode: Admin Mode
Usage Guide: Use this command to view the version information for the switch,
including hardware version and software version.
Example:
Switch#show version
59.30 traceroute
Command: traceroute [source <ipv4-addr> ] { <ip-addr> | host <hostname> } [hops
<hops> ] [timeout <timeout> ]
Function: This command is tests the gateway passed in the route of a packet from the
source device to the target device. This can be used to test connectivity and locate a
failed sector.
Parameter: <ipv4-addr> is the assigned source host IPv4 address in dot decimal format.
<ip-addr> is the target host IP address in dot decimal format. <hostname> is the